MGC Simple Plus

Part# MGC-S-PLUS
Multi Gas Clip Simple Plus Infrared Front
Assembled in the U.S.A.
Sold through distributors worldwide.
4 GAS DETECTOR with 3 YEAR RUN TIME

Gas Detection Made Simple Plus

No charging ever! No calibration necessary! (Can be calibrated if required)

Reliably test for hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.

Low power usage is the key!

Gas Clip Technologies’ continued refinement of advanced low-power photometric infrared technology for combustible gas measurement helps make gas detection simpler and safer than ever. The newest member of their gas detector family, the Multi Gas Clip Simple Plus, features no charging ever and no calibrating necessary. It's SIMPLE to use!

  • 3 year run time - 3 year life!
  • 3 year warranty. For any service, please call our service center.
  • No charging ever! No calibration necessary!
  • Large, easy to read screen
  • Simple One Button Operation
  • Works in oxygen enriched and oxygen deficient environments
  • Continuous 1 second data logging
  • LEL sensor is immune to H2S & silicone poison
  • Assembled in USA
  • Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock
External Pump
Detector(s) sold separately.
External Pump
Part#: GCT-XP
The External Pump gives any Gas Clip diffusion detector the ability to take remote samples from up to 75 feet away, drawing air at greater than one foot per second, and comes with a two-year warranty.
GCT IR LinkGCT IR Link linked to MGC-SIMPLE PLUS detectorGCT IR LinkGCT IR Link linked to MGC-SIMPLE PLUS detector
*System Requirements: Available for Windows© based PCs (Vista, 7, 8.x, 10 64 bit versions)
Detector(s) sold separately.
GCT IR LINK communication module with USB cable
Part#: GCT-IR-LINK
GCT IR LINK communication module with USB cable (for use with all GCT detectors

Pictured linked to an MGC-SIMPLE PLUS detector.
GCT IR Link USB Cable
GCT IR Link
USB Cable
Part#: GCT IR Link USB Cable
GCT IR Link USB Cable
MGC Simple Dock
Detector(s) sold separately.
MGC Simple Clip Dock
Part#: MGC-S-DOCK
Testing dock in portable case with gas compartment, regulator, gauge, charger & USB memory (use with MGC Simple & Simple Plus)
MGC Simple Clip Dock Wall Mount
Detector(s) sold separately.
MGC Simple
Wall Mount
Part#: MGC-S-WMDOCK
Testing dock in metal case with gas compartment, regulator, gauge, charger & USB memory (use with MGC Simple & Simple Plus)
Dock Charger replacement
Detector(s) sold separately.
Dock Charger replacement
Part#: DOCK-CHARGER
Dock charger replacement - std. 110v power supply (for all GCT Clip Docks)
Hand Aspirator Kit for MGC Simple & MGC Simple Plus
Detector(s) sold separately.
Hand Aspirator Kit for MGC Simple & MGC Simple Plus
Part#: MGC-S-HAK
Hand Aspirator Kit for MGC Simple & MGC Simple Plus - Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (use with MGC Simple & Simple Plus).
Confined Space Kit
Detector(s) sold separately.
Gas sold separately.
You can use any calibration gas cylinder as long as it has a C-10 connector.
Confined Space Kit
Part#: GCT-CSK
Hard sided carrying case with foam insert, 1' sampling probe, air stone particulate filter, 10' sampling hose, hand aspirator pump, 3' calibration/test hose with Quick Disconnect, calibration caps (Multi Gas Clip & MGC Simple/Simple Plus), 0.5lpm regulator and GCT IR LINK.
Confined Space Kit W/Gas
Detector(s) sold separately.
You can use any calibration gas cylinder as long as it has a C-10 connector.
Confined Space Kit with 58L Quad Gas
Part#: GCT-CSK-GAS
Hard sided carrying case with foam insert, 58L quad gas cylinder (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL), 1' sampling probe, air stone particulate filter, 10' sampling hose, hand aspirator pump, 3' calibration/test hose with Quick Disconnect, calibration caps (Multi Gas Clip & MGC Simple/Simple Plus), 0.5lpm regulator and GCT IR LINK.

Remote Sampling Probe - 1 ft.
Detector(s) sold separately.
Remote Sampling Probe - 1ft.
Part#: PROBE-1
Remote Sampling Probe - 1 ft.
Quad Gas Cylinder
You can use any calibration gas cylinder as long as it has a C-10 connector.
Quad Gas Cylinder
Part#: MGC-Q-58 / MGC-Q-116
Contains 25 ppm H2S,
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
Manual Regulator
Detector(s) sold separately.
Manual Regulator (non-dock use)
Part#: REG-MANUAL
Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps
External Dust Filter Kit for MGC Simple & MGC Simple Plus
Detector(s) sold separately.
External Dust Filter Kit for MGC Simple & MGC Simple Plus
Part#: MGC-S-X-FILTER-KIT
External Dust Filter Cap plus 5 filters (for use with MGC Simple * Simple Plus only)
Calibration Cap
Calibration Cap
Part#: MGC-S-CALCAP
Calibration Cap replacement (for use with MGC-S & MGC-S-PLUS)
Alligator ClipAlligator Clip
Alligator Clip
Part#: AL-CLIP
Alligator Clip replacement (includes screw) (For use with all GCT Detectors)
Calibration Hose 3 ft.
Calibration Hose 3 ft.
Part#: HOSE-3
Calibration Hose - 3 ft. Tygon ID-1/8" (3.18 mm), OD-1/4" (6.35 mm), Wall-1/16” (1.59 mm)
Remote Sampling Probe Filter & Gasket Replacement Set
Detector(s) sold separately.
Remote Sampling Probe
Filters & Gasket Replacement Set
Part#: PROBE-RF
Remote Sampling Probe Filter & Gasket Replacement Set
Remote Sampling Probe In-Line Water Trap Filter replacement
Detector(s) sold separately.
Remote Sampling Probe In-Line Water Trap Filter replacement
Part#: MGC-WT
Remote Sampling Probe In-Line Water Trap Filter replacement
Sensor - H2S & CO Replacement
Sensor - H2S & CO Replacement
Part#: MGC-SE-4DT
MGC H2S & CO replacement (Dual-Tox) for all MGCs & MGC Pumps